PHS 6 / 8 / 10 Rod End Bearings – Supplier | ProSprint

2026-07-21 21:18
6

PHS Series Rod End Bearings – Quick Guide



Models: PHS 5/6 / 8 / 10/14/12/16/18/20/22/28/30



Selection Guide


  • Load: Handles radial and axial loads. Check static/dynamic ratings.

  • Angle: Tilt up to 8°–15°. Don’t exceed the limit.

  • Thread: Match thread size (M5, M6, M8, M10). PHS = right-hand; PHSL = left-hand.

  • Environment: Use grease nipple models for dusty/wet conditions.


Common Problems & Fixes


ProblemLikely CauseSolution
Play or noisePlay or noise Add grease; replace if worn
Rust or corrosionMoisture or chemicalsUse zinc-plated; seal environment
Stiff movementOver-tightened or debris Cleangrease, check torque


PHS12.jpg



Maintenance Tips

  • Grease regularly with lithium-based grease.

  • Inspect for rust, wear, or damage.

  • Don’t over-tighten. Follow torque specs.

  • Store dry and keep in packaging until use.


Why ProSprint?


  • Short lead times

  • Flexible MOQs

  • On-time delivery


Full specs: please check our model PHS‍10