Gear Rack & Pinion – Supplier | ProSprint

2026-07-22 20:41
7

Gear Rack & Pinion – Quick Guide


Overview

Rack and pinion systems convert rotary motion into linear motion. Ideal for long-stroke, heavy-load applications where ball screws are less practical.


Selection Guide

1. Module – 1.0 to 3.0+ based on load

2. Tooth type – Straight (general) or Helical (smoother, higher load)

3. Accuracy – Milled (standard) or Ground (precision)

4. Splice – Ensure tooth pitch alignment for long travel


Quick Fixes

ProblemSolution
Noise Check mounting; lubricate
Positioning errorPositioning error
Tooth wear Improve lubrication; reduce load
Bolt loosening Re-torque with wrench


Maintenance Tips

  • Lubricate – Steel: gear oil; Nylon: silicone grease

  • Clean – Remove debris regularly; avoid wire brushes

  • Check torque – Re-tighten bolts periodically

  • Monitor backlash – Measure with dial indicator

  • Inspect – Replace when wear exceeds 10%


Why ProSprint?

  • Short lead times

  • Flexible MOQs

  • OEM support

海盛工厂1 (29).jpg


‍Full specs: For more information ,please ch‍ech this stainless steel spur gear