GEZ 19 HO 2 RS vs. GEZ 19 ES-2RS: Why the "HO" Suffix Matters
A European client sent us a photo of a bearing labeled GEZ 19 HO 2 RS. We matched it to a standard GEZ 19 ES-2RS and shipped. The client came back: "It doesn't fit."
They sent us the sample. We compared it side by side. The difference was in the suffix — HO, not ES.
The Technical Difference
| Spec | GEZ 19 ES-2RS | GEZ 19 HO 2 RS |
| Bore diameter | 19.05 mm | 19.05 mm |
| Outer diameter | 31.75 mm | 31.75 mm |
| Inner ring width | 16.662 mm | Different |
| Outer ring width | 14.275 mm | Different |
The bore and outer diameter match. The width does not.
"HO" indicates a non-standard width configuration. A standard ES-series bearing will slide onto the shaft — but it won't seat correctly in the housing. On paper, it looks like a match. In the machine, it fails.
| Image 1 – Client's Original Sample GEZ 19 HO 2 RS, received from European client. Reference for all dimensions.
|
| Image 2 – First Match Attempt (Incorrect) Matched to standard GEZ 19 ES-2RS. Width did not fit.
|
| Side-by-Side Comparison Left: client's sample. Right: corrected match. Width difference is visible.
|
| Image 4 – Verified Match (Correct) Exact dimension match confirmed. Shipped.
|
How We Solved It
1. Client shipped the original sample to us.
2. We measured every dimension — not just the model number.
3. We sourced a domestic manufacturer producing the exact HO configuration.
4. Verified dimensions against the sample. Shipped.
The client confirmed: exact match.
What This Means for You
If you're sourcing GEZ series spherical plain bearings, don't rely on the model number alone. Suffixes like HO, ES, and 2RS change the internal geometry. A "close" match is a failed install.
If you have a sample or a photo, we can match it — dimension by dimension.
ProSprInt Inc. — Bearing sourcing and alternative engineering for industrial applications. Shanghai, China.