3-Step Pre-Installation Checklist for Your FF20 Support Block
1. Clean & Check the Mounting Surface
Action: Wipe the base with isopropyl alcohol. Use a straight edge to check for burrs or debris.
Why: Even minor contaminants can tilt the block when bolts are tightened.
2. Follow the Correct Bolt Tightening Sequence
Action: Hand-tighten all bolts first. Then, use a torque wrench and follow a star pattern, tightening in 2-3 progressive passes to the specified value.
Why: Prevents uneven stress that pulls the block out of alignment.
3. Use the Lead Screw as Your Initial Gauge
Action: After hand-tightening bolts, insert and rotate the lead screw by hand.
Key Check: Feel for any sudden increase in resistance. A smooth rotation is good; a “tight spot” means you need to re-adjust the block position.
Need Help?
If you encounter binding during installation of your FF20 support block, stop and contact us. Providing a photo or short video often allows for remote diagnostics.
FF20 Support Block – Mounting Base View![]() |
![]() |