Custom C45 Bevel Gear Manufacturing Process – Module 1.5, 16 Teeth | CPOS

2026-03-31 10:01
6

From Blank to Bevel Gear: A C45 Custom Gear in Process (m=1.5, z=16)


A customer ordered custom bevel gears: module 1.5, 16 teeth, material C45, grade 8 precision, Ra 3.2µm surface finish.


We documented the process — step by step.


1. Lathe – Shaping the blank

The raw C45 blank is machined on the lathe to create the basic form. This is where geometry begins.

Photo: Lathe operation / blank after turning

齿轮白底-车床.jpg


2. Gear cutting   – Cutting the teeth

After turning, the gear moves to the gear shaper. The teeth are cut one by one, following the module and tooth count precisely.

Photo: Gear after cutting – teeth visible

齿轮白底-刨齿.jpg


3. Hardening & tempering – Strength and durability

The cut gear is heat-treated to achieve the right hardness and toughness for C45. This ensures it can handle real-world loads without wear or failure.

Photo: Gear after heat treatment – color may change, structure becomes stronger

齿轮白底 -调质成品.jpg

   

Next steps:

  • Final finishing

  • Surface quality check (Ra 3.2µm)

  • Dimensional inspection (grade 8)

  • Ready for shipment

You don't just buy a gear. You buy a process we control.


Need a custom gear? Send us your drawing. We’ll show you how it’s made.